|
Still deciding? Get samples of $ !
Request Sample
|
| Customization: | Available |
|---|---|
| After-sales Service: | 24 Hours Responses |
| Warranty: | 3-6 Months |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
This Marble Bathroom Sink is a Calacatta Viola solid block: the basin, the deck and the fluted side are cut from one piece, so there is no joint between the bowl and the top. The stone has a white ground with purple-black veining, and the figure runs unbroken from the fluted front up across the deck and into the basin walls. The front is machined into vertical flutes, which is why the piece reads as a solid stone block rather than a top set on a cabinet.
![]() |
![]() |
One-piece Calacatta Viola sink, fluted front and carved bowl
The bowl is hollowed from the same block, so the drain and the faucet holes are drilled into continuous stone rather than through a separate top. The upstand is cut from that block too, so it carries the same veining as the basin. Sizes are cut against a drawing, typically 600 to 1200mm wide, with the bowl position and the flute pitch set from the drawing.
![]() |
![]() |
Fluted front, carved bowl and drain hole in one continuous body
The photographs below show the inside of the carved bowl and the run of the flutes at close range. The bowl is polished by hand because a machine cannot follow the curve of a carved basin, and the flutes are sanded so the shadow lines stay crisp rather than rounding over at the edges.
![]() |
![]() |
Bowl interior and fluted front, polished by hand
| Material | Calacatta Viola marble |
| Construction | One-piece carved body, basin and fluted front from one block |
| Sizes | Per drawing, typically 600-1200mm wide |
| Thickness | 20mm, 30mm |
| Surface | Polished deck and bowl, fluted front |
| Colour | White with purple-black veining |
| Packing | Timber crate, body braced, flutes protected |
KA UNITED is a stone manufacturer and exporter working from Xiamen, China, supplying marble, quartzite, onyx and granite for hotel, villa and residential interiors. A carved marble sink is worked in our own workshop: the block is cut to profile, the bowl hollowed by CNC and finished by hand, and the flutes machined after the body is hollowed so the wall thickness stays even.
![]() |
KA UNITED Calacatta Viola marble in dining table and table-base applications
The photograph above is not this sink: it shows the same Calacatta Viola marble used in a dining table and a table base, and it is included because the veining and the colour are the same stone as the sink body. It is kept separate from the sink views so a buyer can tell which images show the basin itself.
A one-piece Calacatta Viola body of this kind is heavy enough that it is set on the cabinet carcass before the room is finished, and the carcass has to be specified for it rather than assumed. That is why the weight per drawing is given at quotation.
The block is cut to the outside profile first, then the bowl is hollowed with CNC tooling and finished by hand, because a machine cannot follow the curve of a carved bowl to a polish. The flutes on the front are machined after the body is hollowed so the wall thickness stays even.
A wall-mounted faucet is the usual choice, because the deck behind the bowl is narrow and a deck-mounted body would sit too close to the upstand. If a deck-mounted faucet is wanted, the deck margin has to be set in the drawing before the block is cut.
Yes, and it is a drawing decision rather than an extra operation. Fluting the sides as well as the front changes the pitch count and the wall thickness at the corners, so it has to be settled before the block is cut.
With a neutral cleaner and a soft cloth, and no abrasive and no acidic descaler, because both take the polish off a calcite stone unevenly. Standing water is wiped from the bowl rather than left, since the bowl is stone rather than glaze.